日本玩具協會為保證14歲及14歲以下兒童使用的玩具的安全,特制定了“玩具安全標準(ST)”。S代表安全,T代表玩具。該標準為自愿性質的,符合該標準的產品才被允許在產品本身打上ST標志。ST標志系統還包括了受害者賠償條款,以備標有ST標志的產品被投訴對消費者造成傷害時作出賠償。在市場中攜帶該標志的產品必須在注冊后每年都進行更新。一個產品的ST標志的有效期為四年,此后必須重新進行測試才能繼續攜帶該標志。
Japan Toy Association in order to ensure the safety of the 14-year-old and toys intended for children under the age of 14, especially the development of safety standards for toys (ST). "S stands for safety, T on behalf of the toys. The standard is voluntary, products conforming to this standard are allowed to and marked ST logo in the product itself. The ST logo also includes the terms of the compensation of victims of complaint, prepared ST logo products to compensate harm to consumers. Products in the market to carry the flag after registration must be updated every year. A ST logo is valid for four years, after which must be re-tested in order to continue to carry the flag.
Reference Picture 圖片參考:

如您有相關產品需要咨詢,歡迎您直接來電4000-1998-38咨詢我司工作人員,獲得詳細的費用報價與周期方案等。
上一篇:GB 20286 公共場所阻燃制品燃燒性能要求及標識
下一篇:2021年歐盟RED指令更新消息
- 溫濕度循環協同測試:科學評估產品在熱帶氣候中的長期性能變化規律
- 防沙塵IP6X密封性測試:驗證高粉塵環境下產品完全防塵的防護能力
- 跌落與振動協同模擬:精準預測產品在復雜物流環境中的綜合損傷風險
- 包裝堆碼極限強度測試:確定多層運輸堆疊時的包裝安全承載邊界
- 溫度驟變加速測試:模擬產品在極端溫差環境下的結構穩定性與性能衰減
- 溫度循環加速老化測試:預測產品在頻繁溫變環境中的性能衰減規律
- 振動與沖擊聯合測試:模擬運輸過程中的復合應力對產品的損傷機制
- 多角度跌落模擬測試:精準評估產品在意外跌落場景中的失效風險
- 運輸包裝抗沖擊測試:確保產品在物流環節中的安全抵達與結構完整性
- 冷熱沖擊 vs 溫度循環:熱疲勞機制有何不同?



